Home

Services

Rates

Help &
Support

About Us/
Contact

Tools

Site Map

Quick setup for cisco 675/678

Use a terminal emulator into management port
38400/n/8/1/no flow


You will need the router passwords or refer
to Cisco website to recover passwords


enable
set nvram erase
write
reboot

(678 only:)
  set int wan0-0 close
  write
  set int wan0-0 vpi 0
  set int wan0-0 vci 32
  set int wan0-0 open

set ppp wan0-0 ipcp 0.0.0.0
set ppp wan0-0 dns 0.0.0.0
set ppp wan0-0 login <YOUR DSL LOGIN>
set ppp wan0-0 password <YOUR DSL PASSWORD>
set pass exec <YOUR EXEC PASSWORD>
set pass enable <YOUR ENABLE PASSWORD>
set nat enabled
set web disabled
set web port 5555
set rip disabled
set ppp restart enabled
set dhcp server enabled
write
reboot


If you want to use a static ip address,
do this instead:


enable
set nvram erase
write
reboot

(678 only:)
  set int wan0-0 close
  write
  set int wan0-0 vpi 0
  set int wan0-0 vci 32
  set int wan0-0 open

set ppp wan0-0 login <YOUR DSL LOGIN>
set ppp wan0-0 password <YOUR DSL PASSWORD>
set pass exec <YOUR EXEC PASSWORD>
set pass enable <YOUR ENABLE PASSWORD>
set web disabled
set web port 5555
set rip disabled
set ppp restart enabled
set nat disabled

set ppp wan0-0 dns 0.0.0.0
set ppp wan0-0 ipcp 0.0.0.0
set int eth0 address <YOUR STATIC IP>
set int eth0 netmask <YOUR NETMASK>
set dhcp server disable
write
reboot